[. . . ] IMPORTANT: this baby monitor uses low emission power, in order to protect baby’s health. You are advised to use the “Vox” mode of your baby monitor a maximum: with this function, the receiver and transmitter do not communicate continuously in order so as to the amount of radiation emitted in the bedroom. When baby cries, the system is activated immediately to alert parents; when the baby doesn’t cry, the transmitter and the receiver communicate only each 20 seconds to check the good communication. [. . . ] • Waste Electrical and Electronic Equipment should be disposed of by selective collection. Do not throw electrical and electronic equipment away with unsorted household waste, but dispose of it at a selective collection point. This marking indicates that this product should not be disposed with other household wastes throughout the EU. 8 BABYPHONE SIMPLY CARE • Instruction Manual POWER SUPPLY 1. Operation using batteries (not supplied) Slide open the battery cover of transmitter and receiver. Insert four pieces AAA size (UM-4) alkaline batteries into the compartment. Operation using the (AC adapter not supplied) If you have a 6V 300 mA adapter, the transmitter and the receiver can be operated on AC. Connect the output plug of adapter to DC jack of the transmitter (5) and the receiver (12). : The communication range is longer when the transmitter is operated on AC mains. DC Jack OPERATION A / Transmitter • Switch the transmitter on by setting button (2) to VOX (tripped on voice, recommended) or to ON (continuous operation). € Select either channel 1 or 2 using the Channel Selector Switch (3). € Place the transmitter about 1 m from the cradle, directing the microphone (6) towards the baby. € Under VOX mode, once the built-in microphone picks up any sound from the baby, the transmitter will automatically switches into transmit mode and the transmit indicator (4) lights up. When the baby stop making sound, the transmitter will return to standby mode and the transmit indicator goes off. € Under ON (continuous transmission) mode, the transmitter will always transmit no matter the baby is making any sound or not. This is useful if you want to monitor the slightest sound of the baby. [. . . ] € For more convenience, the receiver can be carried around using the belt clip. € Switch the Power/VOX/ON (2) knob to VOX position or place the transmitter further away from the baby • Remove the electrical appliances away from the source of interference or change the channel. € A large number of steel structures between the transmitter and the receiver. [. . . ]